Conformational analysis 29: Preparation and1H and13C NMR,FTIR, MS,and crystallographic conformational and configurational study of 3-Oxo-1,3-oxathiane and its monomethyl derivatives

3-Oxo-1,3-oxathiane (1) and its monomethyl derivatives were prepared by oxidation of the corresponding 1,3-oxathianes. The structural analysis was carried out by¹H and¹³C NMR, FTIR, and mass spectrometry. At 298 K compound1 was a 1 1 (at 173 K a 3 1) mixture of the SO(ax) and SO(eq) chair forms. The major oxidation products of methyl 1,3-oxathianes attained exclusively the SO(ax), Me(eq) chair forms except that of the 5-methyl derivative, which consisted of 7% of the SO(eq), Me(ax) chair conformation in CDCl₃ solution. The minor products of oxidation existed in anancomeric SO(eq), Me(eq) chair conformations. The oxidation of 2-methyl- 1,3-oxathiane, however, led to 3,3-dioxo derivative (6) in addition to thetrans [SO(eq)] monoxide. The crystal structures of6 andtrans-3-oxo-5-methyl-1,3-oxathiane were solved by X-ray diffractometry.     

化学形态分析

本文综述了金属元素的化学形态分析,包括:形态分析的方法与技术,形态分析在水、土壤、空气和生物样品中的应用,样品的处理方法等。     

发光分析

本文是《分析试验室》定期评述专号中“发光分析”专题的第二篇评述文章,它评述了1988年12月至1990年12月间国内发光分析的进展。内容包括:概述,荧光分析,磷光分析,化学发光和生物发光分析等方面。     

Teaching of process analytical chemistry

In the teaching of analytical chemistry for chemical engineering students it is essential today to teach the chemical analysis of dynamic systems, not only in the process control of the modern technological systems, where the control of composition or structure of different material streams is necessary, but also in all other instances where analysis, decision and intervention follow each other, forming a closed cycle. Teaching can be made effective if students already have a knowledge of the basic disciplines (including analytical chemistry). The schedule of the teaching programme should include the mathematical statistical treatment of process signals, quality of the signals, signal-improvement methods, characteristics of instruments, calibration and an introduction to sensors, analysers suitable for continuous or periodical measurements and local area networks. As practical exercizes an apparatus for investigation of the dynamic properties of a thermoanalytical detector system, a computer program for simulating process variables and the control loop including the measuring system are presented.     

发光分析

本文是《分析试验室》定期评述中“发光分析”课题的第四篇评述文章，它评述在１９９５年１月～１９９６年１２月间我国发光分析的发展概况，内容包括：荧光，磷光，化学发光和生物发光分析等方面，引用文献３５４篇。     

流动注射双安培法测定葛根素

利用不可逆电对的双安培检测原理,建立了流动注射双安培直接检测葛根素的电化学新方法.使用经过恒电位预阳极化处理的双铂电极,通过耦合葛根素在一支电极上的氧化和氧化铂在另一支电极上的还原两个不可逆电极过程,构成流动注射双安培检测体系.在外加电位差为0.2 V时,pH 8.94的碳酸钠-碳酸氢钠缓冲溶液中,测得氧化电流与葛根素浓度在6.0×10-6～1.0×10-3 mol/L范围内呈线性关系(r=0.997 4,n=8),检出限为1.0×10-6 mol/L.连续40次测定6.0 ×10-4 mol/L的葛根素,RSD=1.58%.用该方法对葛根素含量进行了测定,结果令人满意.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Investigation of the detection limit for the determination,by pyrolysis-capillary GC,of the thickness of ultra thin PMMA layers coated on to PET film

The determination of nanometer thick layers of poly(methyl methacrylate) coated on to the surface of poly(ethylene terephthalate) film has been investigated by high resolution pyrolysis gas chromatography without sample pretreatment or modification of the instrumentation used. A good linear relationship was observed between the quantity of the characteristic pyrolysate and the thickness of the poly(methyl methacrylate) layer; the detection limit was sufficient to enable the quantitation of poly(methyl methacrylate)-to-poly(ethylene terephthalate) film thickness ratios of 1:20000 in composite materials.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.